KOMPAS.com -problems that often arise from the tub is leaking. Existing solutions are often not potent due to errors in the deployment method.
Actually, there is a surefire solution to leaking bathtub. Easy, that is the requirement to be extra patient, and out it costs less to buy a waterproofing coatings, fibers or fiber fibers, as well as a mixture of waterproofing.
Specially for bathtubs or outdoor walls with stucco texture of the inside of a little rough, it's good don't it used to diaci. Mix the mortar plastering it with a mixture of waterproofing and wait until it is completely dry or less for 3-4 days. After pelsteran 100 percent hard and dry, lightly coat immediately with waterproofing coating on the entire surface of the inside of the tub.
To the bottom and corner tubs or cavity that is large enough, you can using a wire or fiber. Wait again for two days until it is completely dry, then repeat taste once again. After that, lightly coat again with waterproofing coatings.
Keep in mind, if the stucco is not 100 percent dried directly overlaid, it will come out of "sweat" (water) from the stucco. Certainly, your work will be in vain. It's good, wait again two to three days until a second layer of waterproofing coatings were 100 percent dry.
Don't forget, check the angle is completely dried up or not. After that, rough plaster mixed with waterproofing re back and wait until the stucco to dry it perfectly.
After stucco dries, ceramic paste part in using only the cement and mix it as waterproofing adhesives. After sticking the tiles clean, wait up to half hard. Most importantly, the ceramics are attached tightly.
Next, fill with a mix of white cement grout (color) and a mixture of waterproofing. Wait for 4-5 days back and your bath tub is ready to use with quality extras. Good luck! (Febrina Syaifullana)
Rating: 100% based on 99998 ratings. 5 user reviews.
Author: Unknown
Thank you for your coming, please leave your comment
Tidak ada komentar:
Posting Komentar