Rust
First step, remove the rust on the fence of the House. Make sure your home's iron fence "ready" to accept the paint primer and paint iron. The iron is placed outside the home may be exposed in various ways, and vulnerable is damaged by it.
Over time, iron will rust, retain water, or pulling oil and dirt. The first thing that you should do your looking for the presence of rust. If there is, use gloves, eye protection and mask.
Use a wire brush and scrub the rust area. Later, moisten the rag with mineral spirits, a thinner does not smell, and start to remove the remaining stain. Replace the lap when it was too dirty. If not, your work is removing the rust will be wasted.
Clean Up
The second step is clearing the fence home. After removing rust with mineral spirits, these substances can be left behind on some iron paint.
Before starting to paint, we recommend you wash your fence first. Fill a bucket with hot water and SOAP.
Use the lap you have to soak it in a bucket of cleaning up the fence. Spray with water, then drain the hose overnight.
Painting
Third, start the process of painting the fence home. Use the primer as base. Work quickly coat all over your fence.
Give it at least one time a day to paint the primer dries up. Once the primer dries, lightly coat with iron paint. Wait until the paint dries, lightly coat back with a second layer.
You can also use the kape to scrape the stain and dirt stick. Then, use a fine sandpaper and wipe dry to remove dirt. Then, give the PuTTY to equalize uneven surfaces. Once dry, the sandpaper back, give a layer of priming with quick dry alkaline paint.
Cat came back with a mixture of paint and paint thinner, then apply it with an iron. Wait up to 24 hours, then apply some finishing.
(Source: www.doityourself.com)
Rating: 100% based on 99998 ratings. 5 user reviews.
Author: Unknown
Thank you for your coming, please leave your comment
Tidak ada komentar:
Posting Komentar